Product description
The HEX-NET Pro WiFi Interface communicates with VCDS by wireless WiFi or by wired USB, turning a Windows® PC into a factory level diagnostic tool for VW, Audi, Seat or Skoda automobiles. Also, at no additional cost, embedded in the HEX-NET is our new VCDS-Mobile® software which enables most smart devices with WiFi and a web browser to perform VCDS like diagnostics on non-PC devices.
PC connectivity with VCDS via WiFi or USB
Includes VCDS-Mobile bringing VW/Audi diagnostics to devices such as smartphones and tablets. A chart showing the currently supported functions can be found here.
Compatible with all diagnostic-capable VW/Audi passenger cars from 1996 to current; K, K+L, dual-K, or CAN.
Detachable USB cable. The supplied cable has a proprietary screw locking mechanism, but it can be replaced temporarily with a standard USB-A to USB-B (“printer”) cable should it become damaged.
Modern 32-bit micro-controller and fully updateable firmware.
Three bi-color (red/green) status/activity LEDs
12-month guarantee against defects in workmanship or materials.
Includes an embedded license for VCDS and thus acts as a “dongle” for the software, allowing the software to be used and installed on any compatible PC.
VCDS with HEX-NET can talk to all diagnosable modules including:
Engine
ABS
Air-Bag
Automatic Transmission
Central Electrics
Instruments
CAN Gateway
Immobiliser
Tyre Pressure Monitoring
Heating and Air-Con
Central Locking
Parking Brake
Convertible Roof
Suspension Levelling
Headlight Systems
Body Control Module
Audio / Radio / DAB
and many more…
Compatible with:
Microsoft Windows® versions from Windows 7 through the current Windows 10
Apple iPad®, iPhone®, etc.
Most Android® phones and tablets
Blackberry Z10®, Q10®, etc.
Microsoft Surface® & Windows Phone®
KindleFire®, etc.
Features:
Plugs directly into 1996 through current model year cars; works with all diagnostic-capable VW/Audi cars, even the latest models which require a direct CAN connection and use the UDS/ODX protocol.
Acts as a “dongle” — Activation for the full-function version of VCDS and for VCDS-Mobile is built in. Use the HEX-NET with VCDS on a Windows PC or with VCDS-Mobile on almost any smart device, no activation codes required.
Functions like a factory diagnostic tool – Function Chart
Includes vehicle diagnosis support via our forum.
* Does not include Routan
Includes a detachable 2m long USB A to USB B screw locking wire
This system does *NOT* include vehicle diagnosis support via the telephone. Live telephone technical support for vehicle diagnosis is available separately. One year of such support is included with any of our Pro-Kits.
HEX-NET PRO Unlimited Can it do
Reset service and inspection reminders including 2018 models.
Retract Parking Brake for pad change.
DPF regeneration.
Calibration after replacement of Injectors, DPF pressure sensor, Steering Angle sensor etc.
Read and Clear current and Intermittent fault codes on all diagnostic systems.
View live data as tables, lists, graph or meters.
Run actuator output tests and show feedback.
Basic Settings for calibrations.
Adaptations for Throttle Body reset etc.
Coding for new modules or modifying existing settings such as auto-locking, cornering lamps etc.
and much more…
Ross-Techs new HEX-NET interface for VCDS has all the features of their long-established and well-proven HEX-USB+CAN interface and more. Its faster and more powerful design means it can typically auto-scan a modern car in less than half the time and it works with a USB cable, or without cables using WiFi, giving you the power of VCDS with the flexibility and convenience of a wireless connection.
